意大利NUOVA FAR s.r.l.  www.farlabs.com
意大利NUOVA FAR s.r.l.有限公司成立于1953年，是欧洲规模最大的实验室配件生产厂商之一。FAR所有水龙头的阀芯均采用优质陶瓷球阀，具有操作性能优秀、使用寿命长久和免于维护等优点。

主营产品：
1. 实验室冷暖水龙头
2. 不可燃气体拷克
3. 可燃气体拷克
4. 不锈钢纯水龙头
5. 洗眼器和沖淋装置

Year of its foundation, FAR always grew to the extent of asserting its leadership as company in the field of taps for laboratories, hospitals and schools.
The growing acknowledgement of FAR on the markets it acquired, is the result of a continuous and constant commitment in the design and manufacturing of products capable of meeting the most different market’s requirements.

Thanks to a production with high quality standards and the use of certified and high quality raw materials, FAR makes available for its customers taps with a good quality, guaranteed not only by the experience in the sector but also by the strictness of the tests.

FAR also avails itself of an efficient technical office at the disposal of its customers for technical advice, development of new products or personalization of some already existing products.

All material processing operations are carried out with technologically advanced machines, numeric controlled lathes, CNC welding centers, transfer, epoxy and epoxy polyester powder painting cab, static heating furnace, computerized test bench, etc.

The brass used is completely free from ferrous substances and is used in the form of drawn bars or hot pressed. The alloy used for the brazing is free of Cadmium.

Before painting, taps are completely degreased both externally and internally thanks to the use of a mix of hot water and soap in an ultrasound vat.
This guarantees the absence of polluting substances in the tap when used and this is always fully environment friendly.

The assembly of taps is carried out with the highest accuracy by the responsible staff with a special attention for design.

The pre-assembly before painting, is carried out with loctite or through welding which are then cleaned from slags through sandblasting, without the use of chemical aggressive agents.
In the final stage the assembly of the screwdown is carried out through the use of SIT certified dynamo-metrical wrenches (for gas and water ceramics taps only).

The painting is carried out by skilled staff with cabs and guns always technologically advanced; the powder baking is carried out in a static furnace in order to give hardness and acid resistance to the painting.

FAR’s products quality is further guaranteed by the test of all the taps through the use of a computerized test bench, which gives the possibility to send to the customers a final inspection report, indicating all the test values for each single tap and other useful information.

As guarantee of taps quality FAR has an internal calibration system for the measurement instruments and a thickness gauge with NAMAS certified reference films to check painting thickness.

Packaging A special attention is given to packaging and shipment of goods to avoid any damages during transportation.