M-110Y High Pressure Pneumatic
The M-110Y Microfluidizer processor is a lab machine that provides the highest shear rates of any available mixer or homogenizer on the market today, maximizing the energy-per-unit fluid volume to produce uniform submicron particle and droplet sizes.
Process pressures can be set from 3,000 to 23,000 psi, enabling the processing of a wide variety of fluids ranging from simple oil-in-water emulsions to high-weight-percent solids in liquid suspensions. The system is easy to operate and is designed for in-line cleaning, requiring no disassembly. Recommended for:
Unique wear-resistant ceramic or diamond (optional) fixed-geometry interaction chamber
Guaranteed scaleup through production
All wetted metal parts – 300 series stainless steel, 17-4PH stainless steel, or Nitronic 60. Plunger is chrome-plated.
Open jacket cooling coil
Easy in-line cleaning and simple maintenance
Air-powered and explosion-proof
Portable, benchtop unit
Sanitary fittings
Submersible in cooling or heating bath
CE compliant
400 ml stainless steel manual pressure feed reservoir
2 liter stainless steel reservoir
7.6 liter (2 gallon) pressurized feed tank
2 liter stainless steel pressurized reservoir
Tungsten Carbide plunger in pump
Special designs and construction materials upon request
Autoclavable (sterilizable to 121oC) air motor
Air tank regulator
Sanitary pressure transducer with digital readout
Dual feed assembly
Diamond interaction chamber
Product temperature sensors and indicators
IQ/OQ documentation
| Pressure Range | 3,000 - 23,000 psi (200 to 1586 bar) |
| Flow Rate Range | 100-600 ml/min |
| Feed Temperature Range | -15°F to 165°F (-25°C to 75°C) |
| Processor Air Requirements For Maximum Operating Pressure | 56 scfm @ 96 psi; 15 hp compressor required
26 l/sec @ 5.0 bar; 11 kw compressor required |
| Sample Size | 60 ml to continuous |
| Dimensions | 11”L x 16”W x 30”H (28 x 41 x 76 cm) |
| Weight | 55 lbs. (25 kg) |
