动物脑 定位实验大多需要进行动物的开颅操作，该颅钻 手柄直径只有2.5CM ，手持操作方便。 多种型号钻头可选，另外还可以通过颅钻夹持器固定到定位仪，通过操作臂的上下移动进行控制。
产品特点：
u 手持式小动物颅钻 采用高速电机和进口钻头，性能良好，稳定。
u 动物颅骨开孔进口精密钻头。
u 低噪音、低震动。
u 可以 安装在脑立体定向仪上 ，进行 精确定位与推进，钻孔开颅。
u无级调速。
u 轻便小巧，可手持使用。
颅钻钻头直径：
0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.2mm,
1.4mm,1.6mm,1.8mm,2.1mm,2.3mm
无线微型颅钻 cordless micro drill
The Micro Drill comes with a hard plastic case with die-cut foam for convenient storage, a recharger, and 5 carbide steel burrs with ball sizes of 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, and 1.6 mm. Carbide burr drill bits have a shaft diameter of 2.3 mm and are 4.4 cm in length. No special tools are necessary to change burrs. A set of 5 assorted burrs is available separately.
Can function for 8 hours on a single charge.
The Cordless Micro Drill is designed for research applications that require surgical bits. Made of lightweight aluminum alloy for balance and control, the Micro Drill is powered by a rechargeable 6-volt nickel cadmium battery, and can function for up to 8 hours under normal operating conditions. Speed is 14,400 RPM.
Included Components
The Micro Drill comes with a hard plastic case with die-cut foam for convenient storage, a recharger, and 5 carbide steel burrs with ball sizes of 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, and 1.6 mm. Carbide burr drill bits have a shaft diameter of 2.3 mm and are 4.4 cm in length. No special tools are necessary to change burrs. A set of 5 assorted burrs is available separately.
Length (Without Burr): 17.5 cm
Diameter: 1.9 cm
Power: 6 Volts DC
Speed: 14,400 rpm
高速颅钻 micromotor drill
The high speed drill (up to 38,000 rpm) is configured for stereotaxic surgery, particularly in soft skull animals such as neonatal rats and mice. It’s perfect for use with the 51725 Just for Mice? Stereotaxic.
High Speed Drilling with Easy Positioning
Micromotor technology allows the hand piece itself to contain the motor, yet still maintain a slender profile for easy hand grip.
The high speed drill (up to 38,000 rpm) is configured for stereotaxic surgery, particularly in soft skull animals such as neonatal rats and mice. It’s perfect for use with the 51725 Just for Mice? Stereotaxic.
The compact control includes switches for Power On/Off, Forward or Reverse Rotation, with Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box, or with the foot pedal. An Overload Protector Light turns red and sounds a small beeping alarm when the motor stalls. The back of the control box has a convenient voltage selector switch for operating in either 110 or 220 volt — no need to specify 220 volt when ordering.
悬挂式颅钻 flexible shaft drill, hang-up style
A Lab Standard? drill for over 20 years. The powerful motor and flexible shaft offer very low vibration and noise for long-term, reliable performance. The motor may be suspended from the optional 58652 Motor Support with Table Clamp.
May be mounted on all Lab Standard? and other Stereotaxic Instruments
A Lab Standard? drill for over 20 years. The powerful motor and flexible shaft offer very low vibration and noise for long-term, reliable performance.The motor may be suspended from the optional 58652 Motor Support with Table Clamp.
The heavy metal foot pedal allows exact speed control, and does not slide away from your foot. An optional, 58651 Hand- Dialed Speed control is available for use with, or without, a foot switch.
The drill includes motor, foot pedal, 1/2" handpiece with 3/32" collet, standard for dental drill bits, and a wrench for changing the collet.
Optional 51633, Large Probe Holder table clamp holder is available for hands-fre, e operation.
Optional 58654 Collet kit includes 1/32", 1/16", 3/32" and 1/8" (used for grinding bits from many manufacturers) collets.
Optional 58656 handpiece and stand includes a heavy-duty handpiece with Jacobs? Chuck for bits up to 5/32", and a table clamp holder for hands-free operation. The heavy-duty handpiece fits the end of the flexible shaft, and is easily interchanged.
Catalog number 58655V is 220 Volt and CE approved.
Power: | 1/6 HP (58650) and 1/3 HP (58665V) |
Maximum Speed: | 18,000 RPM (58650) and 15,000 RPM (58665) |
Shaft Length: | 39" |
Shaft Diameter | 0.150 |
颅钻配件 dental drill-bit & accessories
Unique products generally used in Stereotaxic Surgery and procedures. A variety of carbide drill bits, diamond cutting discs and dental cement (a standard in stereotaxic surgery requiring implantation)
High quality carbide drill bits cut cleaner and retain sharp edges longer.
Suitable for use with the 58650 Flexible Shaft Drill, and the 51449 Micromotor Drill. Spherical heads, variety of sizes. Packages of 6 bits (all the same size).
A must for cutting or shaping stainless steel tubing for custom cannulas, knives or syringes.
A diamond disc cuts (rather than grinds) its way through stainless steel tubing. The result is a fast, clean cut with little heat generation and no burrs to remove. Tubing is free of obstruction and ready for use immediately after cutting.
A standard in stereotaxic surgery requiring implantation
Use to affix stainless steel to skull or bone, for lab repairs, or for casting of hard acrylic parts. Particularly useful for securing bone anchor screws in skull holes or cementing cannulae in place.
Dental cement can be cut, drilled or ground. Mixture is exothermic.
Kit includes 1 pound of dental cement, 8 oz. of solvent, and the kit pictured above.
