DR-AY50 CO2 Laser Marking Machine

Features

CO2 laser is a gas laser, which produces a wavelength of 10.6μm, belonging to mid-infrared band. CO2 lasers are relatively large and higher power conversion efficiency, which is the largest power of a laser.

CO2 laser with CO2 gas as the working substance, the CO2 and other auxiliary gas filled discharge tube, when the electrode voltage discharge generated heightening glow discharge, we can release the gas laser, laser energy will be released after amplification , can be laser processing. Laser power, power is controlled by software, continuously adjustable.

1, a large laser power

2, power is controlled by software, continuously adjustable

3, a wide scope of marking

4, marked clear, easy to wear, cutting efficiency

5, can control the depth of carving

6, low processing costs, without supplies

Application of materials and industrial applications

A variety of non-metallic materials can be engraved. Applicable to leather, denim, Plexiglas, acrylic, wood, epoxy resin, unsaturated resin, such as non-metallic materials are widely used in leather, wood, fabric cutting, textiles, plastics, signage, architectural ceramics, medicine, rubber products, beverage packaging, crafts, gifts, electronic components, communications, watches, glasses, printing, shell plate, decoration and other industries. The graphics marked are clear and beautiful, without supplies, stable performance. Maintenance-free of overall machine will last 30,000 hours.

Technical parameters:

Maximum laser power: 50W

Laser wavelength: 10.6μm

Standard engraving range: 110mm × 110mm

Repetition frequency of laser: <25KHZ

Marking Depth: <5mm

Marking wire-speed: <7000mm / s

Minimum line width: 0.1mm / s

Minimum characters: 0.40mm

Repeatability: +0.01 mm

Machine Power Consumption: 1.2KW

Demand for electricity: 220W / single phase / 50HZ/8A