FLDA3531ST_FLDA3532G_FLDA3533S_FLDA3534G_FLDAR3301G流量计OMEGA

Direct Reading Rotor Flowmeters for Air, Water, N2, H2, CO2, Ar, He and O2

Metering tube with guide strip or guide groove is helpful to provide reliable and accurate reading.

Amplifying lens in front shield can enhance reading resolution

Flow pipes and floats are interchangeable

Installation and replacement of flow tube is very convenient.

Simple installation method of panel

The FLD series rotor flowmeter is a precision instrument, which is used to read the flow directly, which embodies the concise, general and economical characteristics of the classic rotor flowmeter.

FLDA3531ST_FLDA3532G_FLDA3533S_FLDA3534G_FLDAR3301G流量计OMEGA

Standard Accuracy: Full Range (+5%)

Repeatability: +0.25%

Available Flow Range: Minimum 10:1

Maximum working pressure: 200 psig/13.8 bars

Maximum operating temperature: 121 C (250 F)

Texture of material

Flow tube: thick-walled borosilicate glass

Float: glass, sapphire, 316 stainless steel, tungsten cobalt carbide and tantalum contact with liquid installation joint selection: black anodic alumina or 316 stainless steel

Side panel: black anodic alumina

正面防护罩：带有纵向放大透镜的聚碳酸酯树脂，可增强读数分辨率

背板：1?8”厚白色丙烯酸树脂

O形圈和填料：铝质／铜质流量计中采用丁钠橡胶O形圈。不锈钢流量计中采用氟橡胶O形圈

选配：全氟橡胶和EPR

连接口：1?8 NPT内螺纹入口和出口连接口

FLDA3531ST_FLDA3532G_FLDA3533S_FLDA3534G_FLDAR3301G流量计OMEGA

FLD系列转子流量计是一种精密仪器，专门用来直接读取流量，它们体现了经典转子流量计所固有的简洁、通用及经济实惠特点。它非常适合计量色层分离法中应用的载体气体、指示和控制加工过程中的气体，还非常适合实验室及实验工厂中气体的测量以及流量和液位指示等。在装配完整发货时，这些流量计中包括标准安装接头（有多种材质备选）、侧面板、较厚的正面放大防护罩和背板，还包括内置的控制阀和流量管。使用选配的丙烯酸三角架FLTR-1，可将面板安装方式转变成支架安装方式。这种三角架中自带水平仪和调平螺钉。