ON-940-44008高精度热敏电阻传感器OMEGA

标准精度在0到70°C之间为±0.2°C，可选精度在0到70°C之间为±0.1°C

最高温度：100°C

提供12”（305mm）长的PFA绝缘导线

该传感器专为高可靠性、高容量和低成本应用而设计，在这些应用中，快速响应时间和较小的物理尺寸是重要考虑因素。将该传感器插入现有的安装孔中即可轻松使用。

ON-940-44008高精度热敏电阻传感器OMEGA

体积小，响应时间快

热敏电阻传感器和电线以环氧树脂的形式封装在一个成型外壳中。

可安装在多种特殊用途的外壳中

可在25°C时提供2252欧姆、3000欧姆、5000欧姆、10000欧姆和30000欧姆的电阻

ON-940-44008高精度热敏电阻传感器OMEGA

Small Size Results in Fast Response Time

Thermistor Sensor and Wires are Epoxied into a Molded Housing

Can Be Installed Into a Large Selection of Housings for Special Applications

Available with Resistances of 2252 Ohms, 3000 Ohms, 5000 Ohms, 10,000 Ohms and 30,000 Ohms at 25°C

Standard Accuracy is ±0.2°C between 0 to 70°C, Optional Accuracy of ±0.1°C between 0 to 70°C is Available

Maximum Temperature: 100°C

Available with 12" (305mm) Long PFA Insulated Lead Wires

This sensor is specifically designed for high reliability, high volume and low cost applications where fast response times and small physical size are important considerations. This sensor can be easily utilized by inserting it into an existing hole for mounting.