Heater control unit  & 120Vac 33W, 2 thermocouple, 54cm cord, 9cm x7.5cm 

HEATER-KIT-1LG

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.

Specification Notes:

• Available in 2 versions:

• 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)

• 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)

• Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.

• Multiple syringe heater pads can be attached to the control unit, under restricted conditions.

• Set point and other parameters retained in memory

• Digitally sets the heater set point

• Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.

• Dual temperature sensors in primary heating pad.

• Alarm modes with multiple layers of protection to prevent temperature overrun.

• Additonal heat protection for the pump may be needed when heating syringes above 100°C.

• If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.

世联博研是flexcell中国授权代理商,授权代理FX-5000C细胞压力加载,FX-5000T细胞应力加载,STR-4000细胞流体切应力,TissueTrain三维细胞组织培养,Flex_SFlexJr显微应力加载系,FlexFlow显微切应力加载,HiQFlowmate液体控,flexsan自动扫描设备和XyFlEX计算软件,OsciFlow_切应力模式控制器,切应力模式控制器,FlexStop真空隔离阀,TTPlate三维细胞培养板,BioFlex培养板,BioFlex(flexcell双向应力培养板),UniFlex(flexcell双向应力培养板),BioPress压力加载配套的BioPress培养板,细胞培养载片,圆形TTCircular三维细胞培养板,HI bioFlex培养板,SFMembrane_硅胶膜,单细胞、单分子牵引应变系统,单个细胞操纵系统,单个病毒操纵系统,单个核酸操纵系统,单个纳米颗粒操纵系统,单个碳纳米管操纵系统,单个蛋白质可逆纳米级操作系统,BioFactory细胞组织三维打印系统,3DDiscovery细胞组织三维打印系统,facsinapetri代理,Cell sorting directly from the Petri dish,全自动单细胞筛选、提取、沉积设备，全自动单细胞筛选仪，全自动单细胞提取仪，全自动单细胞沉积仪,BioRam 活体单细胞显微激光拉曼光谱仪,活态单细胞激光拉曼光谱无损测定鉴别系统,如何怎么样选择选购三维细胞培养系统,如何怎么样选择选购光镊系统,如何怎么样选择选购细胞分选仪器系统,CalScreener无标记细胞能量代谢实时测定仪,高灵敏细胞微量量热系统

现货,附件,HEATER-KIT-1LG,加热器控制单元和注射器加热垫

Heater control unit  & 120Vac 33W, 2 thermocouple, 54cm cord, 9cm x7.5cm 

HEATER-KIT-1LG

Specification Notes:

• Available in 2 versions:

• 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)

• 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)

• Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.

• Multiple syringe heater pads can be attached to the control unit, under restricted conditions.

• Set point and other parameters retained in memory

• Digitally sets the heater set point

• Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.

• Dual temperature sensors in primary heating pad.

• Alarm modes with multiple layers of protection to prevent temperature overrun.

• Additonal heat protection for the pump may be needed when heating syringes above 100°C.

• If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.

Heater control unit  & 120Vac 33W, 2 thermocouple, 54cm cord, 9cm x7.5cm 

HEATER-KIT-1LG

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.

Specification Notes:

• Available in 2 versions:

• 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)

• 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)

• Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.

• Multiple syringe heater pads can be attached to the control unit, under restricted conditions.

• Set point and other parameters retained in memory

• Digitally sets the heater set point

• Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.

• Dual temperature sensors in primary heating pad.

• Alarm modes with multiple layers of protection to prevent temperature overrun.

• Additonal heat protection for the pump may be needed when heating syringes above 100°C.

• If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.

现货,附件,HEATER-KIT-1LG,加热器控制单元和注射器加热垫